Set up build for S32K148 platform on Windows
Open a Ubuntu 22.04 shell running in WSL.
Required tools:
gcc for ARM(tested with version 10-3-2021-10).cmake >= 3.22make
The steps below assume you have already completed Set up build environment for POSIX platform on Windows. If not then please do that first. When that is working, then you just need to add the GCC for ARM toolchain to this environment to build for S32K148 platform.
You can download the GCC for ARM toolchain
(this assumes you have Ubuntu 22.04 running on a x86_64 platform):
wget https://developer.arm.com/-/media/Files/downloads/gnu-rm/10.3-2021.10/gcc-arm-none-eabi-10.3-2021.10-x86_64-linux.tar.bz2
and unpack it in your preferred location as follows:
tar xjf gcc-arm-none-eabi-10.3-2021.10-x86_64-linux.tar.bz2
This will create a directory named gcc-arm-none-eabi-10.3-2021.10 with a bin subdirectory containing the GCC for ARM toolchain.
Add the full path to gcc-arm-none-eabi-10.3-2021.10/bin to your PATH environment variable
and check the compiler is found when you run it:
arm-none-eabi-gcc --version
Then, in the base directory run:
cmake -B cmake-build-s32k148 -S executables/referenceApp -DBUILD_TARGET_PLATFORM="S32K148EVB" --toolchain ../../admin/cmake/ArmNoneEabi10.3-2021.10.cmake
cmake --build cmake-build-s32k148 --target app.referenceApp -j
The build files should be written to a new subdirectory named cmake-build-s32k148
and the built executable should be found at cmake-build-s32k148/application/app.referenceApp.elf
which you can flash on the S32K148 development board.