PWM Console Command

The pwm console command is used to set the PWM duty cycle and period for a specific PWM channel.

• pwm

  • Set PWM

  • all - print all channel numbers and names

  • set - channel[0-9,0xFF=all] duty[0=off|10000=100%]

  • setPeriod - channel[0-9] period[microsec]

Below is the example usage:

pwm set 2 5000

  PWM channel 2 (eval_led_green_pwm) set to 0x1388 % On
ok
23587: RefApp: CONSOLE: INFO: Received console command "pwm set 2 5000"
23593: RefApp: CONSOLE: INFO: Console command succeeded

Next: Lifecycle Console